AM Science

Follow

180 Following

Show all

Posts - that's to be discovered on the topic (16)

rapid.tech 3D 2025 Everything

FIT AG

Combining the best of two worlds: How Mold One Flex brings PU foam components into perfect shape

There is a multitude of different applications for PU foams across all industries. However, conventional toolmaking imposes relatively strict limits on design. The solution: Mold One Flex uses intricate 3D-printed disposable molds that are filled with commercially available PU foams.

qualloy GmbH

Specialist Knowledge

Digital Revolution in Metal Powder Procurement: how qualloy Is Transforming the Market

Procuring metal powder for Additive Manufacturing is often a challenge due to lack of transparency and an overwhelming range of offerings. Digital platforms like qualloy bring clarity, enable comparability, and simplify the procurement process.

rapid.tech 3D

Interview with Simone und Chris Völcker

For the tenth edition of the competition for pioneering technologies, known as the 3DPC, some things will be different than in previous years. The initiators and organizers, Simone and Christoph Völcker, look back on a decade filled with many "goosebump moments."

Ernst-Abbe-Hochschule Jena

Development of a method and a process chain for manufacturing foamed components via large-volume melt processing

A highlight at the booth of the Ernst Abbe University of Applied Sciences (EAH) Jena is the presentation of components made from foamed plastics using Large Scale Additive Manufacturing (LSAM). The exhibits on display were created as part of the research project “3D-Foam.”

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

3D printing on a grand scale – additive manufacturing of large-volume metal components

The Macro-SLM process enables the production of individual metallic components with extremely high build rates in cubic meter dimensions. In contrast to deposition welding, it offers all the design freedom of powder bed-based 3D printing.

rapid.tech 3D

Interview with Dr.-Ing. Stefan Kleszczynski

Dr. Stefan Kleszczynski has been organizing the selection process for scientific topics at rapid.tech 3D since 2016. Since 2023, the director of Manufacturing Technology at the Institute of Product Engineering at the University of Duisburg-Essen has also been a member of the event's advisory board.

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

3D printing in miniature – high-precision additive manufacturing in the micro range

The Micro-SLM process enables the production of metallic or ceramic components with high structural resolution and very low surface roughness. For example, complex internal structures and movable features in the range of a few micrometers can be realized.

Karl SPÄH GmbH & Co. KG

Effective and Sustainable Component Optimization Based on Additive Manufacturing

In addition to the material Polyamide 12 (PA12), SPÄH also offers a special combination of Multi Jet Fusion (MJF) technology and the material Polypropylene (PP)

Karl SPÄH GmbH & Co. KG

Industrial 3D Printing with PP

HP Multi Jet Fusion is a fast and cost-effective 3D printing method for high-quality prototypes, single-unit, and series production of plastic components. Karl Späh GmbH & Co. KG now offers this technology for polypropylene (PP) and provides expert consulting for projects.

Fraunhofer Kompetenzfeld Additive Fertigung

Technical Deep Dive: Fraunhofer Competence Field Additive Manufacturing - Powder characterization using HSI

It is not only the storage and recycling of metal powders that pose technical challenges for additive manufacturing, but also quality control and assurance.

Events (18)

rapid.tech 3D 2025 Everything

Exhibitor Stage

May 13, 2025 10:35 AM - 11:10 AM | Ausstellerforum Halle 2

PSLA - a new 3D printing process for additive manufacturing

Forum AM Science

May 13, 2025 11:30 AM - 12:00 PM | Saal Christian Reichert

A Radio Frequency Quadrupole Prototype Additively Manufactured as a Multi-Material Component

Exhibitor Stage

May 13, 2025 11:45 AM - 12:20 PM | Ausstellerforum Halle 2

Challenges and Potentials in Sourcing Metal Powders for Additive Manufacturing

Forum AM Science

May 13, 2025 12:00 PM - 12:30 PM | Saal Christian Reichert

A Data-Based Certification Approach for Additively Manufactured Metal Aircraft Components

May 13, 2025 12:30 PM - 1:15 PM | Halle 2 - Stand 2-304 Meeting Point

rapid.tech 3D meets Quantum Photonics

Forum AM Science

May 13, 2025 1:45 PM - 2:05 PM | Saal Christian Reichert

Laser-based powder bed fusion of WC-Ni for additive manufacturing of wear resistant tool components

Past events (0)

rapid.tech 3D 2025 Everything

No related events published yet

Providers (9)

rapid.tech 3D 2025 Everything

FIT AG

We are a globally renowned specialist in additive design and additive manufacturing. As a technology leader, we have been achieving proven success from design to manufacturing, for our customers for over 25 years. Like this, you are always one step ahead of your competitors.

2 / 2-307

rapid.tech 3D

At rapid.tech 3D, the focus is on the future of additive manufacturing. With its mix of specialist congress, exhibition and networking opportunities, rapid.tech 3D is a huge pool of information for anyone who wants to invest in AM technologies.

toolcraft AG

Your partner for complete solutions - we combine the breadth of additive and subtractive manufacturing technologies with the depth of the manufacturing process and all automation options.

2 / 2-417

KSB SE & Co. KGaA

KSB is one of the world’s leading suppliers of pumps and valves as well as comprehensive services. The Additive Manufacturing Center in Pegnitz, Germany offers a wide range of manufacturing, consulting, and development services in the field of additive manufacturing.

2 / 2-121

Fraunhofer Kompetenzfeld Additive Fertigung

The Fraunhofer Competence Field Additive Manufacturing integrates twenty Fraunhofer Institutes across Germany. This includes the development, application and implementation of additive manufacturing methods and processes as well as the associated materials.

2 / 2-111

Karl SPÄH GmbH & Co. KG

The expert in rubber and plastic processing in Europe. Thanks to our diverse processing methods, large storage capacity, and nearly endless variety of materials, we meet your individual requirements at our three locations in Germany—promptly and with the highest quality.

2 / 2-208

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

Application-oriented research and development in the field of laser-based additive manufacturing

2 / 2-315

Ernst-Abbe-Hochschule Jena

A highlight at the booth of the Ernst Abbe University of Applied Sciences (EAH) Jena is the presentation of components made from foamed plastics using Large Scale Additive Manufacturing (LSAM). The exhibits on display were created as part of the research project “3D-Foam.”

2 / 2-317

qualloy GmbH

qualloy GmbH is a leading marketplace and knowledge hub for high-quality metal powders, specializing in additive manufacturing.

2 / 2-124