Research and Development

Follow

419 Following

Show all

Posts - that's to be discovered on the topic (9)

rapid.tech 3D 2025 Everything

Optris GmbH & Co. KG

Optris and Micro-Epsilon Conclude 21 Years of Successful Cooperation

After 21 years of successful cooperation, Optris and Micro-Epsilon are amicably ending their partnership. Since 2003, the cooperation has made a significant contribution to establishing Optris as the world's leading manufacturer of infrared temperature measurement technology.

Ernst-Abbe-Hochschule Jena

Development of a method and a process chain for manufacturing foamed components via large-volume melt processing

A highlight at the booth of the Ernst Abbe University of Applied Sciences (EAH) Jena is the presentation of components made from foamed plastics using Large Scale Additive Manufacturing (LSAM). The exhibits on display were created as part of the research project “3D-Foam.”

Fraunhofer Kompetenzfeld Additive Fertigung

Technical Deep Dive: Fraunhofer Competence Field Additive Manufacturing - Powder characterization using HSI

It is not only the storage and recycling of metal powders that pose technical challenges for additive manufacturing, but also quality control and assurance.

Fraunhofer Kompetenzfeld Additive Fertigung

Technical Deep Dives Tour: Fraunhofer IWU - Innovative LPBF process development for new materials in thermal management

The further development of the LPBF process (Laser Powder Bed Fusion) for the processing of innovative materials with outstanding properties opens up promising prospects for thermal management.

TetraVision

Smarter Inspection for Additive Manufacturing: AI vs. Rule-Based Segmentation in Defect Detection

In the world of additive manufacturing, quality control must keep pace with innovation. Traditional rule-based methods are often too rigid to detect the complex, varied defects found in 3D printed parts. That’s where AI steps in.

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

3D printing on a grand scale – additive manufacturing of large-volume metal components

The Macro-SLM process enables the production of individual metallic components with extremely high build rates in cubic meter dimensions. In contrast to deposition welding, it offers all the design freedom of powder bed-based 3D printing.

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

3D printing in miniature – high-precision additive manufacturing in the micro range

The Micro-SLM process enables the production of metallic or ceramic components with high structural resolution and very low surface roughness. For example, complex internal structures and movable features in the range of a few micrometers can be realized.

FARSOON Europe GmbH

Product-Highlight

Precision, Productivity, and Flexibility in Metal 3D Printing – Meet the FS191M

At Farsoon, we believe in giving manufacturers the freedom to innovate. The FS191M is a compact yet powerful metal laser powder bed fusion (L-PBF) system, offering high precision, repeatability, and productivity in a versatile platform.

FIT AG

Service-Highlight

Free FIT guides make fit for the world of AM

In a survey conducted by Vogel Communications, 560 companies were asked why they are not yet using additive manufacturing. For 42.2% of them, it was because they lacked the necessary know-how. The FIT-AM experts are therefore publishing a series of practice-oriented guides.

Past events (5)

rapid.tech 3D 2025 Everything

Exhibitor Stage

May 15, 2025 1:30 PM - 2:05 PM | Halle 2

The influence of orientation and thermal history on the mechanical properties of 316L components

Forum Electronics & Components

May 14, 2025 3:45 PM - 4:15 PM | Saal Carl Zeiss links

Key technological innovations in additive and 3D electronics

Forum Chemistry & Process Engineering

May 14, 2025 1:45 PM - 2:15 PM | Saal Carl Zeiss (rechts)

AM Heat Exchangers for Demanding Applications: Challenges and Opportunities from Technology to Certification

Technical Deep Dives

May 14, 2025 11:00 AM - 12:00 PM | Halle 2

Technical Deep Dives Tour

Technical Deep Dives

May 13, 2025 5:10 PM - 6:10 PM | Halle 2

Technical Deep Dives Tour

Providers (8)

rapid.tech 3D 2025 Everything

FIT AG

We are a globally renowned specialist in additive design and additive manufacturing. As a technology leader, we have been achieving proven success from design to manufacturing, for our customers for over 25 years. Like this, you are always one step ahead of your competitors.

2 / 2-307

rapid.tech 3D

At rapid.tech 3D, the focus is on the future of additive manufacturing. With its mix of specialist congress, exhibition and networking opportunities, rapid.tech 3D is a huge pool of information for anyone who wants to invest in AM technologies.

FARSOON Europe GmbH

Farsoon Europe is advancing industrial innovation with metal and polymer AM solutions. Based in Stuttgart with over a decade of local presence, we offer fully open, flexible systems—customised hardware, open materials, parameters, and software. In Europe, by Europe, for Europe.

2 / 2-415

Fraunhofer Kompetenzfeld Additive Fertigung

The Fraunhofer Competence Field Additive Manufacturing integrates twenty Fraunhofer Institutes across Germany. This includes the development, application and implementation of additive manufacturing methods and processes as well as the associated materials.

2 / 2-111

Optris GmbH & Co. KG

Optris has been developing and manufacturing affordable innovative infrared measurement devices for non-contact temperature measurement, including infrared cameras, and stationary industrial infrared sensors for area and point measurement, for more than 20 years.

2 / 2-215

TetraVision

We are a team of metrology experts, focusing on precision and correctness. In the world of 3D Scanning, optical and X-ray CT, we are a leader and trusted partner, helping you to achieve your goals. Our ISO-17025 accreditation is clear prove of our commitment to quality, accuracy and reliability.

2 / 2-105

Hochschule Mittweida - Laserinstitut Hochschule Mittweida

Application-oriented research and development in the field of laser-based additive manufacturing

2 / 2-315

Ernst-Abbe-Hochschule Jena

A highlight at the booth of the Ernst Abbe University of Applied Sciences (EAH) Jena is the presentation of components made from foamed plastics using Large Scale Additive Manufacturing (LSAM). The exhibits on display were created as part of the research project “3D-Foam.”

2 / 2-317